The One-key Bypass function allows the customer to install a Trend Micro supported fiber or Gigabit network interface card (NIC) into the supported server platform to allow the network traffic to be by-passed on specific error conditions.
Note: IWSVA only supports One-key Bypass functionality in Transparent Bridge Mode.
Setup the by-pass function in one of three settings:
Auto — Bypass is OFF when the system is in a normal state; Bypass mode is ON when system detects an abnormal state such as kernel panic issue or when power is cut off from the IWSVA unit
On — Always bypass traffic
Off — Never bypass traffic
Note: When the One-key Bypass function is set to ON, the data interface is not available. However, the customer can still access IWSVA via the separate management interface, if configured.
The One-key Bypass function supports two port Silicom cards:
PE2G4BPI35A-SD-OU:
http://silicom-usa.com/Networking_Bypass_Adapters/PE2G4BPi35-Quad_Port_Copper_Gigabit_Ethernet_PCI_Express_Bypass_Server_Adapter_Intel_based_58
PEG2BPI6-SD-OU-ROHS
http://silicom-usa.com/Networking_Bypass_Adapters/PEG2BPi6-Dual_Port_Copper_Gigabit_Ethernet_PCI_Express_Bypass_Server_Adapter_Intel_based_58
PEG2BPFI6-SD-OU-ROHS
http://silicom-usa.com/Networking_Bypass_Adapters/PEG2BPFi6-Dual_Port_Fiber_Gigabit_Ethernet_PCI_Express_Bypass_Server_Adapter_Intel_based_58
PEG2BPFI6-LX-SD-OU-ROHS
http://silicom-usa.com/Networking_Bypass_Adapters/PEG2BPFi6-Dual_Port_Fiber_Gigabit_Ethernet_PCI_Express_Bypass_Server_Adapter_Intel_based_58